linkron logo
Ph: (03) 9763-1111
Fax: (03) 9763-6688
info@linkron.com.au
advertise
advertise
advertise
Home >> Touch Tape (Linkfast®) >> Adhesive Tape >> 017PS Adhesive Tape
 
017PS Adhesive Tape
Superior adhesive Touch Tape best for plastics, acrylic, aluminium and other metals. 017PS is basically Sew-on hook & loop with superior self-adhesive glue on release liner. Although it can be used immediately after application, 017PS glue takes 24hrs to cure/bond to the surface. As such, we recommend use after 24hrs.
  Send Enquiry about this product

Adhesive 017PS Tape is an acrylic pressure sensitive adhesive Touch Tape for high temperature performance. It has superior bond strength for use in the Signs & Banners, advertising, automotive, stationery (017PS Adhesive Dots), medical and other industries. The main features of the acrylic adhesive are

* High temperature use
* Strong  bonding strength
* Full bonding strength after 24 hours
* Operating Temperature range from –18°C  to 107°C

017PS is not recommended for rough or grained surfaces. 017PS adhesive is not washable or dry cleanable.

Great for use in

* Sticking posters up. Since 017PS is a Touch Tape, easily take posters down after the event
* Attaching carpet tiles to floor
* Affixing items into position
* Furniture covers, automobile upholstery
* Applying to surfaces that are not suitable for stitching or welding.
eg: Wood, glass, metal, plastic or PVC.

 

SPECIFICATIONS

The following information has been provided to you based on manufacturer's representations. However, Touch Tape is subject to manufacturing tolerances and as such, actual specifications may vary. If there are particular requirements for your Touch Tape, please call us on +61(3)9763-1111 beforehand to obtain confirmation.


Widths:      20mm, 25mm, 50mm, 100mm (25m per roll)
Other widths available on request.
Colours:     Black, White.
Other colours available on request.

Temperature Range

For best results, the adhesive should be applied at room temperature of 20°C (68°F) or higher. If 017PS is required to be applied at temperatures lower than 20°C (68°F), warm the 017PS tape and substrate prior to application.

Surface Preparation

Surface should be clean, dry and free of oils. Use a clean wiping cloth with isopropyl alcohol (rubbing alcohol) to free surface of contaminates and allow to dry. Peel release liner from back of tape and apply. Please take care to avoid touching adhesive with fingers.


ADHESION STRENGTH ON SUBSTRATES
(to be used as a guide only)
Test Material                           Test Result
Aluminum, unpainted    Good
Steel, unpainted    Excellent
Rigid vinyl    Excellent
Polystyrene    Good
Polycarbonate    Excellent
Abs    Excellent
Plexigrass    Excellent
Urethane finished wood  Excellent
Some paints    Good
Polypropylene    Fair
Polyethelene    Poor-fair
Soft vinyl    Good

*