linkron logo
Ph: (03) 9763-1111
Fax: (03) 9763-6688
info@linkron.com.au
advertise
advertise
advertise
Home >> Neoprene >> Heat Tape, Glue & Accessories >> Neoprene Glue Thinner
 
Neoprene Glue Thinner
Used as a reactivating agent when the Neoprene Glue is applied ahead of time. It is a thinner than will dilute Neoprene Glue when it gets gluggy. Used to clean brushes and wiping off glue marks and smears.
  Send Enquiry about this product

Other supplies you might need:
  • ESSENTIAL: Neoprene Glue
  • Heat Seal Tape (puts a nice finish over joins)
  • Mauser Tape (puts a nice finish over joins)
  • Touch Tape (goes great with neoprene as a strap)
  • Sublimation Ink and Paper (if you are printing)
Application

As a Reactivating Agent
: You can apply Neoprene Glue ahead of time and let it dry out. When you are ready, apply a thin layer of Neoprene Glue Thinner to the glue area to "reactivate" the glue which will make it sticky again. Next, join the rubber panels together.

As a Thinner: Dilutes Neoprene Glue when it gets gluggy.

As a Cleaner: Cleans your brushes and used to wipe off glue smears and marks.

_____________________________________________________________________
Warning! Use this product in a well-ventilated area.
For more information, please read Safety Directions on manufacturer's label prior to use.

_____________________________________________________________________


SPECIFICATIONS

Colours
Clear


Packaging
Available in 1 litre and 4 litre cans.

SAFETY DIRECTIONS
The following is an excerpt. Please refer to manufacturer's label for more information.

"Avoid contact with skin and eyes and avoid breathing the vapor or spray mist.
DO NOT SWALLOW. Keep container in a well ventilated place.
Keep away from sources of ignition. No smoking. Do not empty into drains.
Take precautionary measures against static discharges.
Use only in well ventilated areas.
RISK PHRASES:
Harmful by inhalation, in contact with skin and if swallowed.
FIRST AID:
For advice, contact a Poisons Information Centre. Phone 13 11 26 or a doctor.
If swallowed, DO NOT induce vomiting.
If in eyes, wash out immediately with water. If skin or hair contact occurs, remove
contaminated clothing and flush skin and hair with running water. If inhaled, remove
from contaminated area. Apply artificial respiration if not breathing.
Refer to Material Safety Data Sheet for further information."

...